Code Library › Volume 1 › Section 9.20 — Masonry and Insulating Concrete Form
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.20.13.12.Drips Beneath Window Sills

(1) Except for wall openings located less than 150 mm above ground level, where a concealed flashing is not installed beneath window and door sills, such sills shall be provided with an outward slope and a drip located not less than 25 mm from the wall surface.
← Previous9.20.13.11. Caulking at Door and Window FramesNext →9.20.14.1. Laying Temperature of Mortar and Masonry

Common questions about this part of the code

How must brick veneer be supported and tied to a house in Ontario?How thick do above-grade masonry walls have to be in Ontario?What are the Ontario Building Code rules for above-grade ICF walls in houses?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.