Code Library › Volume 1 › Section 9.9 — Means of Egress
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.9.4.5.Openings in Exterior Walls of Exits

(1) Either openings in exterior walls of an exit or openings in adjacent exterior walls of the building the exit serves shall be protected with wired glass in fixed steel frames or glass block installed in accordance with Articles 9.10.13.5. and 9.10.13.7., where (a) the exit enclosure has exterior walls that intersect the exterior walls of the building at an angle of less than 135° measured on the outside of the building, and (b) the openings in the exterior walls of the building are within 3 m horizontally and less than 2 m above the openings in the exterior walls of the exit. (See Note A-9.9.4.5.(1))
← Previous9.9.4.4. Openings Near Unenclosed Exterior Exit Stairs anNext →9.9.4.6. Openings Near Exit Doors

Common questions about this part of the code

What size does a bedroom egress window need to be in Ontario?When does a house need two exits in Ontario?What are the egress requirements for basements in Ontario?What are the travel distance limits to an exit in small buildings in Ontario?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.