Code Library › Volume 1 › Section 9.4 — Structural Requirements
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.4.2.4.Attics and Roof Spaces

(1) Ceiling joists or truss bottom chords in residential attic or roof spaces having limited accessibility that precludes the storage of equipment or material shall be designed for a total specified load of not less than 0.35 kPa, where the total specified load is the sum of the specified dead load plus the specified live load of the ceiling. (See Note A-9.4.2.4.(1))
← Previous9.4.2.3. Platforms Subject to Snow and Occupancy LoadsNext →9.4.3.1. Deflections

Common questions about this part of the code

When can you use Part 9 span tables instead of an engineer in Ontario?What design loads apply to houses under Part 9 in Ontario?What are the basic foundation design rules for houses in Ontario?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.