Code Library › Volume 1 › Section 9.20 — Masonry and Insulating Concrete Form
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.20.9.3.Bonding

(1) Where wythes are bonded together with masonry units, the bonding units shall comprise not less than 4% of the wall surface area. (2) Bonding units described in Sentence (1) shall be spaced not more than 600 mm vertically and horizontally in the case of brick masonry and 900 mm o.c. in the case of block or tile. (3) Units described in Sentence (1) shall extend not less than 90 mm into adjacent wythes.
← Previous9.20.9.2. Bonding or Tying of Other Than Masonry VeneerNext →9.20.9.4. Tying

Common questions about this part of the code

How must brick veneer be supported and tied to a house in Ontario?How thick do above-grade masonry walls have to be in Ontario?What are the Ontario Building Code rules for above-grade ICF walls in houses?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.