Section 1.3 — Referenced Documents and Organizations

(1) Unless otherwise specified in this Code, the documents referenced in this Code shall include all amendments, revisions, reaffirmations, reapprovals, addenda and supplements effective to July 15, 2019.

(1) Where documents are referenced in this Code, they shall be in the editions designated in Table 1.3.1.2. Table 1.3.1.2. Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 2.4.2.5.(1) ACGIH 2013, 28th Edition Industrial Ventilation: A Manual of Recommended Practice for Design 6.2.1.1.(1) 6.3.2.14.(2) Qualification of Post-Installed Mechanical Anchors in Concrete (ACI ACI 355.2-19 4.1.8.18.(7) 355.2-19) and Commentary Qualification of Post-Installed Adhesive Anchors in Concrete (ACI ACI 355.4M-19 4.1.8.18.(7) 355.4M-19) and Commentary North American Standard for Cold Formed Steel Framing – Product AISI S201-12 9.24.1.2.(1) Data 2012 Edition Table 5.9.1.1. ANSI A135.6-2012 Engineered Wood Siding 9.27.9.1.(1) 9.23.15.2.(3) ANSI A208.1-2009 Particleboard 9.29.9.1.(1) 9.30.2.2.(1) Entertainment Technology - Temporary Structures Used for Technical ANSI E1.21-2013 3.17.2.8.(1) Production of Outdoor Entertainment Events 6.3.1.1.(2) 6.3.1.1.(3) ANSI/ASHRAE 62.1-2016 Ventilation for Acceptable Indoor Air Quality 6.3.2.2.(1) 6.3.2.10.(15) ANSI Z21.22-2015 / CSA ANSI/CSA Relief Valves for Hot Water Supply Systems 7.2.10.11.(1) 4.4-2015 ANSI/APA PRG 320- APA Standard for Performance-Rated Cross-Laminated Timber 3.1.6.3.(3) APHA/AWWA/ 2023, 24th Edition Standard Methods for the Examination of Water and Wastewater 8.9.2.4.(1) WEF ASCE ASCE/SEI 49-12 Wind Tunnel Testing for Buildings and Other Structures 4.1.7.14.(1) 5.2.1.3.(1) 6.2.1.1.(1) 6.3.2.12.(1) 7.6.3.1.(2) 7.7.3.1.(1) ASHRAE 2021 Fundamentals 9.32.2.3.(4) 9.32.3.2.(1) 9.33.4.1.(1) 9.33.6.2.(8) 9.33.6.7.(2) 6.2.1.1.(1) 6.3.2.12.(1) 7.6.3.1.(2) 7.7.3.1.(1) ASHRAE 2023 HVAC Applications 9.32.2.3.(4) 9.32.3.2.(1) 9.33.4.1.(1) 9.33.6.2.(8) 9.33.6.7.(2) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 6.2.1.1.(1) 6.3.2.12.(1) 7.6.3.1.(2) 7.7.3.1.(1) ASHRAE 2020 HVAC Systems and Equipment 9.32.2.3.(4) 9.32.3.2.(1) 9.33.4.1.(1) 9.33.6.2.(8) 9.33.6.7.(2) 6.2.1.1.(1) 6.3.2.12.(1) 7.6.3.1.(2) 7.7.3.1.(1) ASHRAE 2022 Refrigeration 9.32.2.3.(4) 9.32.3.2.(1) 9.33.4.1.(1) 9.33.6.2.(8) 9.33.6.7.(2) 6.2.1.1.(1) Minimizing the Risk of Legionellosis Associated with Building Water ASHRAE Guideline 12-2000 6.3.2.15.(9) Systems 6.3.2.16.(1) Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and ASME A112.19.8-2007 3.12.4.1.(9) Hot Tubs ASME B16.3-2016 Malleable Iron Threaded Fittings: Classes 150 and 300 7.2.6.6.(1) 7.2.6.5.(1) ASME B16.4-2016 Gray Iron Threaded Fittings: Classes 125 and 250 Table 7.2.11.2. Pipe Flanges and Flanged Fittings: NPS ½ through NPS 24 Metric/Inch ASME B16.5-2017 7.2.6.12.(1) Standard 7.2.6.11.(1) ASME B16.9-2018 Factory-Made Wrought Buttwelding Fittings 7.2.6.14.(1) ASME B16.12-2009 Cast Iron Threaded Drainage Fittings 7.2.6.3.(1) ASME B16.15-2018 Cast Copper Alloy Threaded Fittings: Classes 125 and 250 7.2.7.3.(1) 7.2.7.6.(1) ASME B16.18-2018 Cast Copper Alloy Solder Joint Pressure Fittings 7.2.7.6.(2) Table 7.2.11.2. 7.2.7.6.(1) ASME B16.22-2018 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings Table 7.2.11.2. ASME B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings: DWV 7.2.7.5.(1) Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, ASME B16.24-2016 7.2.7.2.(1) 300, 600, 900, 1500 and 2500 7.2.7.7.(1) ASME B16.26-2013 Cast Copper Alloy Fittings for Flared Copper Tubes 7.2.7.7.(2) Table 7.2.11.2. Wrought Copper and Wrought Copper Alloy Solder Joint Drainage ASME B16.29-2018 7.2.7.5.(1) Fittings - DWV ANSI/ASME B18.6.1- ASME Wood Screws (Inch Series) Table 5.9.1.1. Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference ASME B31.9-2017 Building Services Piping 7.3.2.8.(1) ASME B36.19M-2018 Stainless Steel Pipe 7.2.6.10.(1) 3.5.2.2.(1) ASME A17.1-2016 / Table 4.1.5.11. ASME/CSA Safety Code for Elevators and Escalators CSA B44-16 Table 4.1.8.18. 7.4.3.6.(1) ASME A112.3.4-2018 / Macerating Toilet Systems and Waste-Pumping Systems for Plumbing ASME/CSA 7.2.2.2.(1) CSA B45.9-18 Fixtures ASME A112.4.2- ASME/CSA Personal hygiene devices for water closets 7.2.2.2.(1) 2015/CSA B45.16-15 ASME A112.4.14- ASME/CSA Manually Operated Valves for Use in Plumbing Systems 7.2.10.6.(7) 2017/CSA B125.14-17 7.2.10.6.(1) ASME A112.18.1-2018 / ASME/CSA Plumbing Supply Fittings 7.2.10.7.(1) CSA B125.1-18 7.2.10.7B.(1) ASME A112.18.2-2015 / 7.2.3.3.(1) ASME/CSA Plumbing Waste Fittings CSA B125.2-15 7.2.10.6.(6) ASME A112.18.6- ASME/CSA Flexible water connectors 7.2.10.18.(1) 2017/CSA B125.6-17 ASME A112.19.1-2018 / 7.2.2.2.(1) ASME/CSA Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures CSA B45.2-18 ASME A112.19.2-2018 / ASME/CSA Ceramic Plumbing Fixtures 7.2.2.2.(1) CSA B45.1-18 ASME A112.19.3-2017 / ASME/CSA Stainless Steel Plumbing Fixtures 7.2.2.2.(1) CSA B45.4-17 ASME A112.19.7-2012 / ASME/CSA Hydromassage Bathtub Systems 7.2.2.2.(1) CSA B45.10-12 ASPE Plumbing Engineering Design 7.6.3.1.(2) ASPE Fundamentals of Plumbing Engineering Handbook - Volume 1 7.7.3.1.(1) ASPE Plumbing Engineering Design 7.6.3.1.(2) ASPE Plumbing Systems Handbook - Volume 2 7.7.3.1.(1) ASPE Plumbing Engineering Design 7.6.3.1.(2) ASPE Special Plumbing Systems Handbook -Volume 3 7.7.3.1.(1) ASPE Plumbing Engineering Design 7.6.3.1.(2) ASPE Plumbing Components and Equipment Handbook - Volume 4 7.7.3.1.(1) ASSE ANSI/ASSE 1010-2004 Water Hammer Arresters 7.2.10.15.(1) Individual and Branch Type Air Admittance Valves for Sanitary Drainage ASSE 1051-2009 7.2.10.16.(1) Systems ASSE 1002-2015/ASME ASSE/ASME/CSA A112.1002-2015/CSA Anti-siphon fill valves for water closet tanks 7.2.10.10.(2) B125.12-15 Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference ASSE 1016-2017/ASME Performance Requirements for Automatic Compensating Valves for ASSE/ASME/CSA A112.1016-2017/CSA 7.2.10.7.(1) Individual Showers and Tub/Shower Combinations B125.16-17 ASSE 1037-2015/ASME Performance requirements for pressurized flushing devices for plumbing ASSE/ASME/CSA A112.1037-2015/CSA 7.2.10.8.(1) fixtures B125.37-15 ASSE 1070-2015/ASME ASSE/ASME/CSA A112.1070-2015/CSA Performance requirements for water temperature limiting devices 7.2.10.7.(2) B125.70-15 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc- ASTM A53 / A53M-18 7.2.6.7.(4) Coated Welded and Seamless Standard Specification for Zinc (Hot Dip Galvanized) Coatings on Iron Table 5.9.1.1. ASTM A123 / A123M-17 and Steel Products Table 9.20.16.1. Table 5.9.1.1. Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel ASTM A153 / A153M-16a Table 9.20.16.1. Hardware 9.23.2.4.(2) Standard Specification for Forged or Rolled Alloy and Stainless Steel 7.2.6.12.(1) ASTM A182 / A182M-19 Pipe Flanges, Forged Fittings, and Valves and Parts for High- 7.2.6.13.(1) Temperature Service ASTM A252-10 Standard Specification for Welded and Seamless Steel Pipe Piles 4.2.3.8.(1) Seamless and Welded Austenitic Stainless Steel Tubing for General ASTM A269-15a 7.2.6.14.(1) Service Standard Specification for Low and Intermediate Tensile Strength ASTM A283 / A283M-18 4.2.3.8.(1) Carbon Steel Plates Standard Specification for Seamless, Welded, and Heavily Cold Worked ASTM A312 / A312M-18a 7.2.6.10.(1) Stainless Steel Pipes Standard Specification for Castings, Austenitic, for Pressure-Containing ASTM A351 / A351M-18 7.2.6.13.(1) Parts Standard Specification for Wrought Austenitic Stainless Steel Piping ASTM A403 / A403M-19 7.2.6.11.(1) Fittings Standard Specification for Corrosion-Resistant High-Silicon Iron ASTM A518 / A518M-99 7.2.8.1.(1) Castings Table 5.9.1.1. Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or ASTM A653 / A653M-18 9.3.3.2.(1) Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process 9.23.2.4.(1) Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy- ASTM A792 / A792M-10 9.3.3.2.(1) Coated by the Hot-Dip Process Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, ASTM A1008 / A1008M-18 High-Strength Low-Alloy, High-Strength Low-Alloy with Improved 4.2.3.8.(1) Formability, Solution Hardened, and Bake Hardenable Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, ASTM A1011 / A1011M-18a Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with 4.2.3.8.(1) Improved Formability, and Ultra-High Strength ASTM B32-08 Standard Specification for Solder Metal 7.2.9.2.(1) ASTM B42-15a Standard Specification for Seamless Copper Pipe, Standard Sizes 7.2.7.1.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference ASTM B43-15 Standard Specification for Seamless Red Brass Pipe, Standard Sizes 7.2.7.1.(2) ASTM B68 / B68M-19 Standard Specification for Seamless Copper Tube, Bright Annealed 7.2.7.4.(4) 7.2.7.4.(1) ASTM B88-16 Standard Specification for Seamless Copper Water Tube 7.2.7.4.(4) Table 7.2.11.2. ASTM B306-13 Standard Specification for Copper Drainage Tube (DWV) 7.2.7.4.(1) Standard Specification for Liquid and Paste Fluxes for Soldering of ASTM B813-16 7.2.9.2.(3) Copper and Copper Alloy Tube Standard Specification for Making Capillary Joints by Soldering of ASTM B828-16 7.3.2.4.(1) Copper and Copper Alloy Tube and Fittings Table 5.9.1.1. ASTM C4-04 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile 9.14.3.1.(1) ASTM C27-98 Standard Specification for Fireclay and High-Alumina Refractory Brick 9.21.3.4.(1) Table 5.9.1.1. ASTM C73-17 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) 9.20.2.1.(1) Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Table 5.9.1.1. ASTM C126-13 Facing Brick, and Solid Masonry Units 9.20.2.1.(1) Table 5.9.1.1. ASTM C212-17 Standard Specification for Structural Clay Facing Tile 9.20.2.1.(1) ASTM C260 / C260M-10a Standard Specification for Air-Entraining Admixtures for Concrete 9.3.1.8.(1) 3.6.5.4.(4) Standard Specification for Hot-Surface Performance of High- ASTM C411-19 3.6.5.5.(1) Temperature Thermal Insulation 9.33.8.2.(2) Table 5.9.1.1. ASTM C412M-15 Standard Specification for Concrete Drain Tile (Metric) 9.14.3.1.(1) Table 5.9.1.1. ASTM C444M-17 Standard Specification for Perforated Concrete Pipe (Metric) 9.14.3.1.(1) ASTM C494 / C494M-17 Standard Specification for Chemical Admixtures for Concrete 9.3.1.8.(1) Standard Specification for Mineral Fiber Blanket Thermal Insulation for ASTM C553-13 Table 5.9.1.1. Commercial and Industrial Applications Standard Specification for Mineral Fiber Block and Board Thermal ASTM C612-14 Table 5.9.1.1. Insulation Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Table 5.9.1.1. ASTM C700-18 Strength and Perforated 9.14.3.1.(1) Table 5.9.1.1. ASTM C726-17 Standard Specification for Mineral Wool Roof Insulation Board 9.25.2.2.(1) Table 5.9.1.1. ASTM C834-17 Standard Specification for Latex Sealants 9.27.4.2.(2) 3.1.6.6.(6) r1 ASTM C840-18b Standard Specification for Application and Finishing of Gypsum Board Table 5.9.1.1. 9.29.5.1.(3) Table 5.9.1.1. ASTM C920-18 Standard Specification for Elastomeric Joint Sealants 9.27.4.2.(2) Standard Specification for Steel Drill Screws for the Application of ASTM C954-18 Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 9.24.1.4.(1) 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Standard Specification for Flexible Fibrous Glass Insulation for Metal ASTM C991-16 Table 5.9.1.1. Buildings Standard Specification for Steel Self-Piercing Tapping Screws for the Table 5.9.1.1. ASTM C1002-07 Application of Gypsum Panel Products or Metal Plaster Bases to Wood 9.24.1.4.(1) Studs or Steel Studs 9.29.5.7.(1) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, ASTM C1053-00 7.2.8.1.(1) Waste and Vent (DWV) Applications 3.1.5.14.(6) Standard Specification for Glass Mat Gypsum Substrate for Use as 3.1.5.15.(4) ASTM C1177 / C1177M-17 Sheathing Table 5.9.1.1. Table 9.23.17.2-A 3.1.5.14.(6) Standard Specification for Coated Glass Mat Water-Resistant Gypsum 3.1.5.15.(4) ASTM C1178 / C1178M-18 Backing Panel Table 5.9.1.1. 9.29.5.2.(1) Table 5.9.1.1. ASTM C1184-18e1 Standard Specification for Structural Silicone Sealants 9.27.4.2.(2) Standard Specification for Application of Exterior Gypsum Panel ASTM C1280-13 Table 5.9.1.1. Products for Use as Sheathing Table 5.9.1.1. ASTM C1311-14 Standard Specification for Solvent Release Sealants 9.27.4.2.(2) Standard Specification for Cylindrical Sealant Backing for Use with Cold Table 5.9.1.1. ASTM C1330-18 Liquid-Applied Sealants 9.27.4.2.(3) 3.1.5.14.(6) 3.1.5.15.(4) 3.1.6.6.(2) 3.1.6.6.(3) 3.1.6.6.(4) r1 ASTM C1396 / C1396M-17 Standard Specification for Gypsum Board 3.1.6.6.(5) 3.1.6.15.(1) Table 5.9.1.1. Table 9.23.17.2.-A 9.29.5.2.(1) Table 9.29.5.3. 3.1.5.14.(6) ASTM C1658 / C1658M-18 Standard Specification for Glass Mat Gypsum Panels Table 5.9.1.1. Standard Specification for Vapor Pressure of Petroleum Products (Reid ASTM D323-15a 1.4.1.2.(1) of Division A Method) ASTM D374-99 / D374M-16 Standard Test Methods for Thickness of Solid Electrical Insulation 3.15.4.1.(1) Standard Test Method for Rate of Burning and/or Extent and Time of ASTM D635-22 3.15.4.1.(1) Burning of Plastics in a Horizontal Position Table 5.9.1.1. Standard Specification for Emulsified Asphalt Used as a Protective ASTM D1227 / D1227M-13 9.13.2.2.(2) Coating for Roofing 9.13.3.2.(2) Standard Specification for Asphalt Glass Felt Used in Roofing and ASTM D2178 / D2178M-13a Table 5.9.1.1. Waterproofing Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe ASTM D2466-17 7.2.5.7.(2) Fittings, Schedule 40 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe ASTM D2467-15 7.2.5.7.(2) Fittings, Schedule 80 Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 3.1.4.8.(3) 3.1.5.5.(3) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated r1 ASTM D2898-10 3.1.5.24.(1) Wood for Fire Testing 3.1.6.9.(8) 3.2.3.7.(4) Table 5.9.1.1. Standard Specification for Lap Cement Used with Asphalt Roll Roofing, ASTM D3019 / D3019M-17 9.13.3.2.(2) Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered Table 9.27.2.1.-B Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic ASTM D3261-16 7.2.5.4.(3) Fittings for Polyethylene (PE) Plastic Pipe and Tubing ASTM D3679-17 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding 9.27.12.1.(1) Standard Test Method for Measuring the Comparative Burning ASTM D3801-20a 3.15.4.1.(1) Characteristics of Solid Plastics in a Vertical Position Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) ASTM D4477-16 9.27.12.1.(3) (PVC) Soffit Table 5.9.1.1. 9.13.2.2.(2) ASTM D4479 / D4479M-07e1 Standard Specification for Asphalt Roof Coatings - Asbestos-Free 9.13.3.2.(2) Table 9.26.2.1.-B Table 5.9.1.1. Standard Specification for EPDM Sheet Used In Single-Ply Roof ASTM D4637 / D4637M-15 9.13.3.2.(2) Membrane Table 9.26.2.1.-B Table 5.9.1.1. Standard Specification for Nonvulcanized (Uncured) Rubber Sheet ASTM D4811 / D4811M-16 9.13.3.2.(2) Used as Roof Flashing Table 9.26.2.1.-B Standard Specification for Evaluation of Structural Composite Lumber ASTM D5456-19 3.1.11.7.(5) Products Table 5.9.1.1. Standard Specification for Thermoplastic Polyolefin Based Sheet ASTM D6878 / D6878M-11a 9.13.3.2.(2) Roofing Table 9.26.2.1.-B ASTM D7254-17 Standard Specification for Polypropylene (PP) Siding 9.27.13.1.(1) ASTM D7793-17 Standard Specification for Insulated Vinyl Siding 9.27.12.1.(2) 5.8.1.2.(1) Standard Test Method for Laboratory Measurement of Airborne Sound ASTM E90-09 5.8.1.4.(1) Transmission Loss of Building Partitions and Elements 9.11.1.2.(1) 5.5.1.2.(3) 9.13.2.2.(2) ASTM E96 / E96M-16 Standard Test Methods for Water Vapor Transmission of Materials 9.25.4.2.(1) 9.25.4.2.(2) 9.25.5.1.(1) Standard Test Method for Determining Rate of Air Leakage Through ASTM E283-04 Exterior Windows, Curtain Walls, and Doors Under Specified Pressure 5.9.3.4.(2) Differences Across the Specimen Standard Test Method for Water Penetration of Exterior Windows, ASTM E331-00 Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure 5.9.3.5.(2) Difference Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 5.8.1.2.(2) Standard Test Method for Measurement of Airborne Sound Attenuation ASTM E336-11 5.8.1.4.(7) Between Rooms in Buildings 9.11.1.2.(2) 5.8.1.2.(1) 5.8.1.2.(2) 5.8.1.4.(7) ASTM E413-16 Classification for Rating Sound Insulation 5.8.1.5.(3) 9.11.1.2.(1) 9.11.1.2.(2) Standard Test Method for Water Penetration of Exterior Windows, ASTM E547-00 Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure 5.9.3.5.(2) Difference Standard Practice for Determining Load Resistance of Glass in ASTM E130016 4.3.6.1.(1) Buildings Standard Specification for Insulating Glass Unit Performance and Table 5.9.1.1. ASTM E2190-19 Evaluation 9.6.1.2.(1) Standard Test Method for Determining Fire Resistance of Perimeter Fire 3.1.8.3.(4) ASTM E2307-15b Barriers Using Intermediate-Scale, Multi-storey Test Apparatus 9.10.9.2.(4) ASTM F476-14 Standard Test Methods for Security of Swinging Door Assemblies 9.7.5.2.(2) 7.2.5.9.(1) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) ASTM F628-12e2 7.2.5.11.(1) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core 7.2.5.11.(1.1) Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) ASTM F714-13 7.2.5.5.(1) Based on Outside Diameter 9.23.3.1.(1) ASTM F1667-18a Standard Specification for Driven Fasteners: Nails, Spikes and Staples 9.26.2.3.(1) 9.29.5.6.(1) Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 ASTM F3128-19 7.2.5.16.(1) Drain, Waste, and Vent Pipe with a Cellular Core ANSI/AWS A5.8M / A5.8: AWS Specification for Filler Metals for Brazing and Braze Welding 7.2.9.2.(4) ANSI/AWWA C104 / 7.2.6.4.(2) AWWA Cement-Mortar Lining for Ductile-Iron Pipe and Fittings A21.4-13 Table 7.2.11.2. ANSI/AWWA C110 / 7.2.6.4.(3) AWWA Ductile-Iron and Gray-Iron Fittings A21.10-12 Table 7.2.11.2. ANSI/AWWA C111 / 7.2.6.4.(4) AWWA Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings A21.11-12 Table 7.2.11.2. ANSI/AWWA C151 / 7.2.6.4.(1) AWWA Ductile-Iron Pipe, Centrifugally Cast A21.51-09 Table 7.2.11.2. Stainless-Steel Pipe Flanges For Water Service - Sizes 2 in. through AWWA ANSI/AWWA C228-08 7.2.6.12.(1) 72 in. (50 mm through 1,800 mm) Version 2, 21st Sept, 8.7.8.3.(2) BCMOH Sewerage System Standard Practice Manual 2007 8.7.8.3.(3) Polyethylene (PE) Pipe and Fittings - Flexible Pipes for Drainage - Table 5.9.1.1. BNQ BNQ 3624-115-2016 Characteristics and Test Methods 9.14.3.1.(1) CAN/BNQ 3680-600- 8.6.2.2.(5) BNQ Onsite Residential Wastewater Treatment Technologies 2023 Table 8.6.2.2. Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 2.1.2.3.(3) CCBFC NRCC 38726 1995 National Building Code of Canada 2.1.2.3.(5) 2.1.2.3.(1) 2.1.2.3.(2) CCBFC NRCC 38732 1995 National Farm Building Code of Canada 2.1.2.3.(3) 2.1.2.3.(5) NRCC-CONST-56435E e1 CCBFC National Building Code of Canada 2.4.2.1.(2) of Division C NRCC-CONST-56436E CCBFC National Plumbing Code of Canada 2.4.2.1.(2) of Division C 1.4.1.2.(1) of Division A 2.2.6.11.(1) 2.2.8.1.(1) 2.2.8.1.(4) 2.2.8.7.(1) CCBFC NRCC-CONST-56437E National Fire Code of Canada 2.4.2.3.(4) 2020 3.1.13.1.(1) 3.3.1.2.(1) 3.3.5.2.(1) 3.7.5.2.(1) 6.9.1.2.(1) 5.5.1.2.(2) CGSB CAN/CGSB-1.501-M89 Method of Permeance of Coated Wallboard 9.25.4.2.(7) CGSB CAN/CGSB-7.2-94 Adjustable Steel Columns 9.17.3.4.(1) 9.21.3.4.(2) CGSB CAN/CGSB-10.3-92 Air Setting Refractory Mortar 9.21.3.9.(1) 9.22.2.2.(2) Table 5.9.1.1. CGSB CAN/CGSB-11.3-M87 Hardboard 9.29.7.1.(1) 9.30.2.2.(1) 3.3.1.20.(3) 3.3.2.17.(1) 3.3.2.17.(2) 3.4.6.15.(1) 3.4.6.15.(3) CGSB CAN/CGSB-12.1-2017 Safety Glazing 3.7.4.10.(1) Table 5.9.1.1. 9.6.1.2.(1) 9.6.1.4.(1) 9.6.1.4.(6) 9.8.8.7.(1) Table 5.9.1.1. CGSB CAN/CGSB-12.2-M91 Flat, Clear Sheet Glass 9.6.1.2.(1) Table 5.9.1.1. CGSB CAN/CGSB-12.3-M91 Flat, Clear Float Glass 9.6.1.2.(1) Table 5.9.1.1. CGSB CAN/CGSB-12.4-M91 Heat Absorbing Glass 9.6.1.2.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference CGSB CAN/CGSB-12.5-M86 Mirrors, Silvered 9.6.1.2.(3) Table 5.9.1.1. CGSB CAN/CGSB-12.8-97 Insulating Glass Units 9.6.1.2.(1) Table 5.9.1.1. CGSB CAN/CGSB-12.9-M91 Spandrel Glass 9.6.1.2.(1) CGSB CAN/CGSB-12.10-M76 Glass, Light and Heat Reflecting 9.6.1.2.(1) 3.3.1.20.(3) 3.4.6.15.(1) 3.4.6.15.(3) CGSB CAN/CGSB-12.11-M90 Wired Safety Glass 9.6.1.2.(1) 9.6.1.4.(1) 9.8.8.7.(1) CGSB CAN/CGSB-12.20-M89 Structural Design of Glass for Buildings 4.3.6.1.(1) CGSB CAN/CGSB-19.22-M89 Mildew Resistant Sealing Compound for Tubs and Tiles 9.29.10.5.(1) Table 5.9.1.1. Primer, Asphalt, Unfilled, for Asphalt Roofing, Dampproofing and CGSB 37-GP-9Ma-1983 9.13.3.2.(2) Waterproofing Table 9.26.2.1.-A Table 5.9.1.1. CGSB CAN/CGSB-37.50-M89 Hot-Applied, Rubberized Asphalt for Roofing and Waterproofing 9.13.3.2.(2) Table 9.26.2.1.-B Application for Hot-Applied Rubberized Asphalt for Roofing and CGSB CAN/CGSB-37.51-M90 9.26.15.1.(1) Waterproofing Table 5.9.1.1. CGSB CAN/CGSB-37.54-95 Polyvinyl Chloride Roofing and Waterproofing Membrane 9.13.3.2.(2) Table 9.26.2.1.-B Application of Sheet Applied Flexible Polyvinyl Chloride Roofing CGSB 37-GP-55M-1979 9.26.16.1.(1) Membrane Membrane, Modified, Bituminous, Prefabricated, and Reinforced for 9.13.3.2.(2) CGSB 37-GP-56M-1985 Roofing Table 9.26.2.1.-B Table 5.9.1.1. Membrane, Elastomeric, Cold-Applied Liquid, for Non-Exposed Use in CGSB CAN/CGSB-37.58-M86 9.13.3.2.(2) Roofing and Waterproofing Table 9.26.2.1.-B Table 9.23.17.2.-A CGSB CAN/CGSB-51.25-M87 Thermal Insulation, Phenolic, Faced 9.25.2.2.(1) CGSB 51-GP-27M-1979 Thermal Insulation, Polystyrene, Loose Fill 9.25.2.2.(1) Table 5.9.1.1. 9.20.13.9.(1) CGSB CAN/CGSB-51.32-M77 Sheathing, Membrane, Breather Type Table 9.26.2.1.-A 9.27.3.2.(1) Vapour Barrier, Sheet, Excluding Polyethylene, for Use in Building Table 5.9.1.1. CGSB CAN/CGSB-51.33-M89 Construction 9.25.4.2.(5) Table 5.9.1.1. 9.13.2.2.(2) 9.13.4.2.(1.2) CGSB CAN/CGSB-51.34-M86 Vapour Barrier, Polyethylene Sheet for Use in Building Construction 9.18.6.2.(1) 9.25.3.2.(2) 9.25.4.2.(4) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference CGSB CAN/CGSB-51.71-2005 Depressurization Test 9.32.3.8.(7) CGSB CAN/CGSB-82.6-M86 Doors, Mirrored Glass, Sliding or Folding, Wardrobe 9.6.1.2.(2) Table 5.9.1.1. CGSB CAN/CGSB-93.1-M85 Sheet, Aluminum Alloy, Prefinished Residential 9.27.11.1.(3) 3.2.3.6.(5) Table 5.9.1.1. CGSB CAN/CGSB-93.2-M91 Prefinished Aluminum Siding, Soffits and Facsia for Residential Use 9.10.14.5.(12) 9.27.11.1.(2) 6.9.4.4.(1) CSA CAN/CSA-6.19-01 Residential carbon monoxide alarming devices 9.32.3.9.(2) 9.32.3.9C.(1) 4.2.3.6.(1) 4.2.3.9.(1) Table 5.9.1.1. 9.3.1.1.(1) CSA A23.1:19 Concrete materials and methods of concrete construction 9.3.1.1.(4) 9.3.1.3.(1) 9.3.1.4.(1) 9.40.1.4.(1) Table 4.1.8.9. CSA A23.3:19 Design of concrete structures 4.1.8.18.(7) 4.3.3.1.(1) CSA A60.1-M1976 Vitrified Clay Pipe 7.2.5.3.(1) CSA A60.3-M1976 Vitrified Clay Pipe Joints 7.2.5.3.(2) Table 5.9.1.1. CSA CAN/CSA-A82-14 Fire masonry brick made from clay or shale 9.20.2.1.(1) 3.1.5.14.(6) 3.1.5.15.(4) 3.1.6.6.(2) r1 3.1.6.6.(3) CSA CAN/CSA-A82.27-M91 Gypsum Board 3.1.6.6.(4) 3.1.6.6.(5) 3.1.6.15.(1) 9.29.5.2.(1) CSA A82.30-M1980 Interior Furring, Lathing and Gypsum Plastering 9.29.4.1.(1) 3.2.3.6.(5) 9.10.9.2.(5) CSA A82.31-M1980 Gypsum Board Application 9.10.12.4.(3) 9.10.14.5.(12) 9.29.5.1.(2) Table 5.9.1.1. CSA CAN3-A93-M82 Natural Airflow Ventilators for Buildings 9.19.1.2.(5) Table 5.9.1.1. CSA CAN/CSA-A123.2-03 Asphalt Coated Roofing Sheets 9.13.3.2.(2) Table 9.26.2.1.-B Table 5.9.1.1. CSA A123.3-05 Asphalt Saturated Organic Roofing Felt Table 9.26.2.1.-B Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 5.9.1.1. Asphalt for Constructing Built-Up Roof Coverings and Waterproofing 9.13.2.2.(2) CSA CAN/CSA-A123.4-04 Systems 9.13.3.2.(2) Table 9.26.2.1.-B Table 5.9.1.1. Asphalt shingles made from glass felt and surfaced with mineral CSA A123.5:16 9.13.3.2.(2) granules Table 9.26.2.1.-B Table 5.9.1.1. CSA CAN/CSA-A123.16:04 Asphalt-coated glass-base sheets Table 9.26.2.1.-B Table 5.9.1.1. CSA A123.17-05 Asphalt Glass Felt Used in Roofing and Waterproofing 9.13.3.2.(2) Table 9.26.2.1.-B Standard test method for the dynamic wind uplift resistance of CSA CAN/CSA-A123.21:14 5.2.2.2.(4) membrane-roofing systems Self-Adhering Polymer Modified Bituminous Sheet Materials Used as CSA A123.22-08 Table 9.26.2.1-.B Steep Roofing Underlayment for Ice Dam Protection Product specification for polymer-modified bitumen sheet, prefabricated Table 5.9.1.1. CSA A123.23-15 and reinforced Table 9.26.2.1.-B Table 5.9.1.1. CSA A123.51-14 Asphalt shingle application on roof slopes 1:6 and steeper 9.26.1.3.(1) Table 5.9.1.1. 9.15.2.2.(1) CSA A165.1-14 Concrete block masonry units 9.17.5.1.(1) 9.20.2.1.(1) 9.20.2.6.(1) Table 5.9.1.1. CSA A165.2-14 Concrete brick masonry units 9.20.2.1.(1) Table 5.9.1.1. CSA A165.3-14 Prefaced concrete masonry units 9.20.2.1.(1) Table 5.9.1.1. CSA CAN/CSA-A179-14 Mortar and Grout for Unit Masonry 9.15.2.2.(3) 9.20.3.1.(1) Table 5.9.1.1. CAN/CSA-A220 CSA Concrete Roof Tiles Table 9.26.2.1.-B Series-06 9.26.17.1.(1) Non-reinforced circular concrete culvert, storm drain, sewer pipe, and CSA A257.1:19 7.2.5.2.(1) fittings CSA A257.2:19 Reinforced circular concrete culvert, storm drain, sewer pipe, and fittings 7.2.5.2.(1) Joints for circular concrete sewer and culvert pipe, manhole sections, CSA A257.3:19 7.2.5.2.(2) and fittings using rubber gaskets Precast reinforced circular concrete manhole sections, catch basins, CSA A257.4:19 7.2.5.2.(5) and fittings 9.1.1.9.(1) Procedure for certification of prefabricated buildings, modules, and 1.12.1.1.(1) of Division C CSA A277-16 panels 3.1.1.1.(2) of Division C 3.2.4.1.(3) of Division C CSA CAN/CSA-A324-M88 Clay Flue Liners 9.21.3.3.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 5.9.1.1. 9.15.2.2.(3) CSA CAN/CSA-A371-14 Masonry Construction for Buildings 9.20.3.2.(7) 9.20.15.2.(1) 9.21.3.5.(1) CSA CAN/CSA-A405-M87 Design and Construction of Masonry Chimneys and Fireplaces 9.22.1.4.(1) 9.22.5.2.(2) 5.9.2.2.(1) Table 9.7.3.3. AAMA/WDMA/CSA NAFS – North American Fenestration Standard/Specification for 9.7.4.1.(1) CSA 101/I.S.2/A440-17 windows, doors, and skylights 9.7.4.2.(1) 9.7.5.1.(1) 9.7.5.3.(1) 5.9.2.2.(1) Canadian Supplement to AAMA/WDMA/CSA 101/I.S.2/A440-17, NAFS 5.9.3.5.(3) CSA A440S1:19 - North American Fenestration Standard/Specification for windows, 9.7.4.2.(1) doors, and skylights 9.7.4.3.(1) CSA A440.2-14 Fenestration Energy Performance 12.3.1.2.(1) Fenestration Energy Performance / user Guide to CSA A440.2-14, CSA A440.2:19 / A440.3:19 Table 9.7.3.3. Fenestration energy performance CSA CAN/CSA-A440.4:19 Window, door, and skylight installation 9.7.6.1.(1) CSA A660-10 Certification of manufacturers of steel building systems 4.3.4.3.(1) Table 5.9.1.1. CSA A3001-18 Cementitious Materials for Use in Concrete 9.3.1.2.(1) 9.28.2.1.(1) r1 CSA B52:23 Mechanical refrigeration code 6.3.1.5.(4) Definitions, general requirements, and test methods for vacuum CSA B64.0-11 7.2.10.10.(1) breakers and backflow preventers CSA B64.1.1-11 Atmospheric vacuum breakers (AVB) 7.2.10.10.(1) CSA B64.1.2-11 Pressure vacuum breakers (PVB) 7.2.10.10.(1) CSA B64.1.3-11 Spill-resistant pressure vacuum breakers (SRPVB) 7.2.10.10.(1) CSA B64.1.4-11 Vacuum breaker, air space type (ASVB) 7.2.10.10.(1) CSA B64.2-11 Hose connection vacuum breakers (HCVB) 7.2.10.10.(1) CSA B64.2.1-11 Hose connection vacuum breakers (HCVB) with manual draining feature 7.2.10.10.(1) CSA B64.2.1.1-11 Hose connection dual check vacuum breakers (HCDVB) 7.2.10.10.(1) Hose connection vacuum breakers (hcvb) with automatic draining CSA B64.2.2-11 7.2.10.10.(1) feature 7.2.10.10.(1) CSA B64.3-11 Dual check valve backflow preventers with atmospheric port (DCAP) 7.6.2.5A.(4) Dual check valve backflow preventers with atmospheric port for CSA B64.3.1-11 7.2.10.10.(1) carbonators (DCAPC) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 7.2.10.10.(1) CSA B64.4-11 Reduced Pressure Principle (RP) backflow preventers 7.6.2.4.(2) 7.2.10.10.(1) Reduced pressure principle backflow preventers for fire protection CSA B64.4.1-11 7.6.2.4.(2) systems (RPF) 7.6.2.4.(4) 7.2.10.10.(1) CSA B64.5-11 Double check valve (DCVA) backflow preventers 7.6.2.4.(2) Double check valve backflow preventers for fire protection systems 7.2.10.10.(1) CSA B64.5.1-11 (DCVAF) 7.6.2.4.(2) 7.2.10.10.(1) 7.6.2.4.(2) CSA B64.6-11 Dual check valve (DuC) backflow preventers 7.6.2.6.(3) 7.7.1.1.(6) 7.2.10.10.(1) CSA B64.6.1-11 Dual check valve backflow preventers for fire protection systems (DuCF) 7.6.4.2.(2) CSA B64.7-11 Laboratory faucet vacuum breakers (LFVB) 7.2.10.10.(1) CSA B64.8-11 Dual check valve backflow preventers with intermediate vent (DuCV) 7.2.10.10.(1) Single check valve backflow preventers for fire protection systems 7.2.10.10.(1) CSA B64.9-11 (SCVAF) 7.6.2.4.(2) 7.2.10.10.(1) CSA B64.10-17 Selection and installation of backflow preventers 7.6.2.3.(1) 7.6.2.6.(1) 8.2.2.2.(1) Design, material, and manufacturing requirements for prefabricated 8.2.2.2.(2) CSA B66-21 septic tanks and sewage holding tanks 8.2.2.3.(7) 8.2.2.3.(11) 7.2.6.1.(1) CSA B70-12 Cast iron soil pipe, fittings and means of joining 7.4.6.4.(2) CSA B70.1-03 Frames and Covers for Maintenance Holes and Catchbasins 7.2.6.2.(1) 9.23.3.1.(1) CSA B111-1974 Wire Nails, Spikes and Staples 9.26.2.3.(1) 9.29.5.6.(1) 7.2.10.6.(1) 7.2.10.7.(2) CSA B125.3-18 Plumbing fittings 7.2.10.7.(3) 7.2.10.7B.(2) CSA CAN/CSA-B126.0-13 General requirements and methods of testing for water cisterns 7.7.2.4.(6) CSA CAN/CSA-B126.1-13 Installation of water cisterns 7.7.2.4.(6) CSA CAN/CSA-B127.3-18 Fibrocement drain, waste, and vent pipe and pipe fittings 7.2.5.1.(1) 7.7.1.2.(1) CSA CAN/CSA-B128.1-06 Design and installation of non-potable water systems 7.7.3.1.(1) Polyethylene (PE) pipe, tubing and fittings for cold water pressure 7.2.5.4.(1) CSA B137.1-17 services Table 7.2.11.2. Polyvinylchloride (PVC) injection-moulded gasketed fittings for pressure 7.2.5.7.(3) CSA B137.2-17 applications 7.2.5.9.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 7.2.5.7.(1) CSA B137.3-17 Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications 7.2.5.9.(1) Table 7.2.11.2. Crosslinked polyethylene (PEX) tubing systems for pressure 7.2.5.6.(1) CSA B137.5-17 applications Table 7.2.11.2. Chlorinated polyvinylchloride (CPVC) pipe, tubing, and fittings for hot- 7.2.5.8.(1) CSA B137.6-17 and cold-water distribution systems Table 7.2.11.2. Polyethylene/aluminum/polyethylene (PE-AL-PE) composite pressure- 7.2.5.12.(1) CSA B137.9-17 pipe systems Table 7.2.11.2. 7.2.5.12.(4) Crosslinked polyethylene/aluminum crosslinked polyethylene CSA B137.10-17 7.2.5.13.(1) (PEX-AL-PEX) composite pressure-pipe systems Table 7.2.11.2. CSA B137.11-17 Polypropylene (PP-R) pipe and fittings for pressure applications 7.2.5.14.(1) Polyethylene of raised temperature resistance (PE-RT) tubing systems CSA B137.18-17 7.2.5.15.(1) for pressure applications CSA B158.1-1976 Cast Brass Solder Joint Drainage, Waste and Vent Fittings 7.2.10.1.(1) 7.2.5.9.(1) 7.2.5.10.(1) Acrylonitrile-butadiene-styrene (ABS) drain, waste, and vent pipe and 7.2.5.11.(1) CSA B181.1-18 pipe fittings 7.2.5.11.(1.1) 7.2.10.1.(2) 7.4.6.4.(2) 7.2.5.9.(1) 7.2.5.10.(1) 7.2.5.11.(1) Polyvinylchloride (PVC) and chlorinated polyvinylchloride (CPVC) drain, 7.2.5.11.(1.1) CSA B181.2-18 waste, and vent pipe and pipe fittings 7.2.5.16.(1) 7.2.5.16.(2) 7.2.10.1.(3) 7.4.6.4.(2) Polyolefin and polyvinylidene fluoride (PVDF) laboratory drainage CSA B181.3-18 7.2.8.1.(1) systems Table 5.9.1.1. 7.2.5.9.(1) CSA B182.1-18 Plastic drain and sewer pipe and pipe fittings 7.2.5.11.(1.1) 7.4.6.4.(2) 9.14.3.1.(1) 7.2.5.9.(1) CSA B182.2-18 PSM type polyvinylchloride (PVC) sewer pipe and fittings 7.2.5.11.(1.1) CSA B182.4-18 Profile polyvinylchloride (PVC) sewer pipe and fittings 7.2.5.9.(1) Profile polyethylene (PE) sewer pipe and fittings for leak-proof sewer CSA B182.6-18 7.2.5.9.(1) applications CSA B182.8-18 Profile polyethylene (PE) storm sewer and drainage pipe and fittings 7.2.5.9.(1) 6.2.1.1.(1) CSA B214-16 Installation code for hydronic heating systems 6.2.1.5.(6) 9.33.4.2.(1) CSA B242-05 Groove- and Shoulder-Type Mechanical Pipe Couplings 7.2.10.4.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference CSA B272-93 Prefabricated Self-Sealing Roof Vent Flashings 7.2.10.14.(2) CSA B355:19 Platform lifts and stair lifts for barrier-free access 3.8.3.5.(1) CSA CAN/CSA-B356-10 Water pressure reducing valves for domestic water supply systems 7.2.10.12.(1) 6.2.1.5.(1) 6.2.1.5.(5) CSA B365-17 Installation code for solid-fuel-burning appliances and equipment 9.21.1.4.(1) 9.22.10.2.(1) 9.33.5.3.(1) CSA B366.1-11 Solid-Fuel-Fired Central Heating Appliances 6.2.1.5.(2) 6.2.1.5.(7) CSA B415.1-10 Performance Testing of Solid-Fuel-Burning Heating Appliances 9.33.5.3.(2) CSA B481.0-12 Material, design, and construction requirements for grease interceptors 7.2.3.2.(3) 7.2.3.2.(4) CSA B481.1-12 Testing and Rating of Grease Interceptors Using Lard 8.1.3.1.(8) 7.2.3.2.(4) CSA B481.2-12 Testing and Rating of Grease Interceptors Using Oil 8.1.3.1.(8) CSA B481.3-12 Sizing, Selection, Location, and Installation of Grease Interceptors 7.2.3.2.(3) CSA B481.4-12 Maintenance of Grease Interceptors 8.9.3.3.(1) 6.2.1.5.(1) 6.2.1.5.(5) CSA B365-17 Installation code for solid-fuel-burning appliances and equipment 9.21.1.4.(1) 9.22.10.2.(1) 9.33.5.3.(1) CSA B366.1-11 Solid-Fuel-Fired Central Heating Appliances 6.2.1.5.(2) 6.2.1.5.(7) CSA B415.1-10 Performance Testing of Solid-Fuel-Burning Heating Appliances 9.33.5.3.(2) CSA B481.0-12 Material, design, and construction requirements for grease interceptors 7.2.3.2.(3) 7.2.3.2.(4) CSA B481.1-12 Testing and Rating of Grease Interceptors Using Lard 8.1.3.1.(8) 7.2.3.2.(4) CSA B481.2-12 Testing and Rating of Grease Interceptors Using Oil 8.1.3.1.(8) CSA B481.3-12 Sizing, Selection, Location, and Installation of Grease Interceptors 7.2.3.2.(3) CSA B481.4-12 Maintenance of Grease Interceptors 8.9.3.3.(1) CSA CAN/CSA-B483.1-07 Drinking Water Treatment Systems 7.2.10.17.(1) CSA B602-16 Mechanical couplings for drain, waste, and vent pipe and sewer pipe 7.2.10.4.(2) 3.8.3.1.(7) CSA B651-18 Accessible design for the built environment 3.8.3.1.(8) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 3.1.4.3.(1) 3.1.4.3.(3) 3.1.5.21.(1) CSA C22.2 No. 0.3-09 Test methods for electrical wires and cables 3.1.5.21.(3) 3.1.5.25.(1) 3.1.5.25.(2) 9.34.1.5.(1) CSA C22.2 No.113-10 Fans and Ventilators 9.32.3.10.(7) 3.2.7.4.(2) 3.4.5.1.(3) CSA C22.2 No. 141:15 Emergency lighting equipment 9.9.11.3.(3) 9.9.12.3.(7) CSA C22.2 No. 211.0-03 General Requirements and Methods of Testing for Nonmetallic Conduit 3.1.5.23.(1) CAN/CSA-C22.2 CSA Optical Fiber Cable and Communication Cable Raceway Systems 3.1.5.23.(1) No. 262-04 CAN/CSA-C22.3 CSA Overhead Systems 3.1.20.1.(2) No. 1-20 CSA CAN/CSA-C88-M90 Power Transformers and Reactors 3.6.2.7.(10) 9.32.3.10.(1) Rating for the Performance of Residential Mechanical Ventilating CSA CAN/CSA-C260-M90 9.32.3.10.(2) Equipment Table 9.32.3.10.-B CSA C282-15 Emergency electrical power supply for buildings 3.2.7.5.(1) Standard laboratory methods of test for rating the performance of 9.32.3.10.(4) CSA CAN/CSA-C439-09 heat/energy-recovery ventilators 9.32.3.10.(5) Design and Installation of Earth Energy Systems for Commercial and 6.2.1.5.(4) CSA CAN/CSA-C448.1-13 Institutional Buildings 9.33.5.2.(2) Design and Installation of Earth Energy Systems for Residential and 6.2.1.5.(3) CSA CAN/CSA-C448.2-13 Other Small Buildings 9.33.5.2.(1) Determining the required capacity of residential space heating and 9.33.4.1.(1) CSA F280-12 cooling appliances 9.33.5.1.(3) 9.32.3.1.(1) CSA CAN/CSA-F326-M91 Residential Mechanical Ventilation Systems 9.33.4.1.(1) CAN/CSA- F379 Series-09 Packaged solar domestic hot water systems (liquid-to-liquid heat CSA 7.2.10.13.(1) (excluding Supplement transfer) F379S1-11) 7.6.1.8.(1) CAN/CSA- Packaged solar domestic hot water systems (liquid-to-liquid heat CSA 7.6.2.5A.(3) F379.1-09 transfer) for All Season Use 7.6.2.5A.(4) r1 CSA CAN/CSA-F383-08 Installation of packaged solar domestic hot water systems 7.6.1.8.(1) 9.3.1.1.(4) CSA G30.18-09 Carbon steel bars for concrete reinforcement 9.40.1.3.(1) 4.2.3.8.(1) CSA G40.21-13 Structural quality steel Table 5.9.1.1. 9.23.4.3.(2) CSA CAN/CSA-G164-M92 Hot Dip Galvanizing of Irregularly Shaped Articles 4.4.5.1.(4) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 5.9.1.1. CSA CAN/CSA-G401-14 Corrugated steel pipe products 7.2.6.8.(1) 9.14.3.1.(1) 3.1.4.5.(1) CSA CAN/CSA-O80 Series-15 Wood preservation 4.2.3.2.(1) Table 5.9.1.1. CSA CAN/CSA-O80.0-15 General requirements for wood preservation 4.2.3.2.(2) 4.2.3.2.(1) CSA CAN/CSA-O80.1-15 Specification of treated wood 9.3.2.9.(5) CSA CAN/CSA-O80.2-15 Processing and treatment 4.2.3.2.(1) CSA CAN/CSA-O80.3-15 Preservative formulations 4.2.3.2.(1) Table 4.1.8.9. CSA O86:19 Engineering design in wood 4.3.1.1.(1) Table 5.9.1.1. CSA O118.1-08 Western Red Cedar Shakes and Shingles Table 9.26.2.1.-B 9.27.7.1.(1) Table 5.9.1.1. CSA O118.2-08 Eastern White Cedar Shingles Table 9.26.2.1.-B 9.27.7.1.(1) Table 5.9.1.1. Table 9.23.12.3.-A Table 9.23.12.3.-B Table 9.23.12.3.-C CSA O121-17 Douglas fir plywood Table 9.23.17.2.-A 9.23.15.2.(1) 9.23.16.2.(1) 9.27.8.1.(1) 9.30.2.2.(1) Table 9.23.4.2.-K CSA CAN/CSA-O122-16 Structural glued-laminated timber Table 9.23.12.3.-D CAN/CSA-O132.2 CSA Wood Flush Doors 9.7.4.3.(4) Series-90 Table 5.9.1.1. CSA O141:05 Softwood Lumber 9.3.2.6.(1) Table 5.9.1.1. Table 9.23.12.3.-A Table 9.23.12.3.-B Table 9.23.12.3.-C CSA O151-17 Canadian softwood plywood 9.23.15.2.(1) 9.23.16.2.(1) Table 9.23.17.2.-A 9.27.8.1.(1) 9.30.2.2.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 5.9.1.1. 9.23.15.2.(1) 9.23.16.2.(1) CSA O153-13 Poplar plywood Table 9.23.17.2.-A 9.27.8.1.(1) 9.30.2.2.(1) 4.3.1.2.(1) Qualification Code for Manufacturers of Structural Glued-Laminated CSA O177-06 Table 9.23.4.2.-K Timber Table 9.23.12.3.-D Table 5.9.1.1. Table 9.23.12.3.-A Table 9.23.12.3.-B Table 9.23.12.3.-C Table 9.23.13.6. 9.23.15.2.(1) 9.23.15.4.(2) CSA O325-16 Construction sheathing 9.23.16.2.(1) 9.23.16.3.(2) Table 9.23.16.7.-B Table 9.23.17.2.-A Table 9.23.17.2.-B 9.29.9.1.(2) 9.29.9.2.(5) Table 5.9.1.1. Table 9.23.12.3.-A Table 9.23.12.3.-B Table 9.23.12.3.-C 9.23.15.2.(1) 9.23.15.4.(2) CSA O437.0-93 OSB and Waferboard 9.23.16.2.(1) 9.23.16.3.(2) Table 9.23.17.2.-A 9.27.10.1.(1) 9.29.9.1.(2) 9.30.2.2.(1) Table 4.1.8.9. CSA S16-19 Design of Steel Structures 4.3.4.1.(1) 4.1.6.15.(1) CSA S37-18 Antennas, Towers, and Antenna-Supporting Structures 4.1.7.11.(1) North American specification for the design of cold formed steel 4.1.8.1.(5) CSA S136-16 structural members (using the Appendix B provisions applicable to Table 4.1.8.9. Canada) 4.3.4.2.(1) Strength design in aluminum / Commentary on CSA S157-17, Strength CSA S157-17 / S157.1-17 4.3.5.1.(1) design in aluminum Table 4.1.8.9. CSA S304-14 Design of masonry structures 4.3.2.1.(1) CSA S367-12 Air-, cable-, and frame-supported membrane structures 4.4.1.1.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 9.13.2.7.(1) Specification of permanent wood foundations for housing and small CSA S406-16 9.15.2.4.(1) buildings 9.16.5.1.(1) CSA S413-14 Parking structures 4.4.2.1.(1) 5.1.4.2.(3) CSA S478-19 Durability in buildings Table 5.9.1.1. 3.2.7.3.(4) CSA Z32-15 Electrical safety and essential electrical systems in health care facilities 3.2.7.6.(1) 3.7.5.1.(1) 3.1.1.1.(2) of Division C CSA Z240 MH Series-16 Manufactured homes 3.2.4.1.(3) of Division C 9.1.1.9.(1) CSA Z240.2.1-16 Structural requirements for manufactured homes 9.12.2.2.(6) 9.15.1.3.(1) 9.15.1.3.(1) CSA Z240.10.1-19 Site preparation, foundation, and installation of buildings 9.23.6.3.(1) 9.39.1.1.(1) CAN/CSA-Z241 9.39.2.1.(1) CSA Park model trailers Series-18 3.1.1.1.(2) of Division C 3.2.4.1.(3) of Division C r1 CSA CSA Z271:20 Design of suspended access equipment 4.4.5.1.(2) Special requirements for heating, ventilation and air conditioning 6.2.1.1.(1) CSA CAN/CSA-Z317.2-15 (HVAC) systems in health care facilities 6.2.3.15.(6) CSA CAN/CSA-Z662-15 Oil and gas pipeline systems 3.2.3.22.(1) Medical gas piping systems - Part 1: Pipelines for medical gases, CSA Z7396.1-17 medical vacuum, medical support gases, and anaesthetic gas 3.7.5.2.(1) scavenging systems CSA B45.5-17 / IAPMO CSA / IAPMO Plastic plumbing fixtures 7.2.2.2.(1) Z124-2017 CSA B805-18 / CSA / ICC Rainwater harvesting systems 7.7.2.4.(4) ICC 805-2018 CSSBI 23M-2016 Standard for Residential Steel Cladding 9.27.11.1.(1) 9.4.1.1.(1) 9.23.13.1.(2) CWC 2014 Engineering Guide for Wood Frame Construction 9.23.13.2.(2) 9.23.13.3.(2) Table 11.5.1.1.-A Table 11.5.1.1.-B Technical Paper No. 194, DBR Fire Endurance of Protected Steel Columns and Beams Table 11.5.1.1.-C May 1965 Table 11.5.1.1.-D/E Table 11.5.1.1.-F Table 11.5.1.1.-A Table 11.5.1.1.-B Technical Paper No. 207, DBR Fire Endurance of Unit Masonry Walls Table 11.5.1.1.-C October 1965 Table 11.5.1.1.-D/E Table 11.5.1.1.-F Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 11.5.1.1.-A Table 11.5.1.1.-B Technical Paper No. 222, DBR Fire Endurance of Light-Framed and Miscellaneous Assemblies Table 11.5.1.1.-C June 1966 Table 11.5.1.1.-D/E Table 11.5.1.1.-F Radon Prevention in the Design and Construction of Schools and Other EPA 625/R-92/016 (1994) 6.2.1.1.(1) Large Buildings FINA 2021 Rules and Regulations - FINA Facilities Rules 2021-2025 - FR3 Diving 3.11.4.1.(17) HC SOR/2015-17 Hazardous Products Regulations 1.4.1.2.(1) of Division A 6.2.1.1.(1) 9.32.2.3.(4) HI 2005 Hydronics Institute Manuals 9.32.3.2.(1) 9.33.4.1.(1) 9.33.6.7.(2) Table 5.9.1.1. HPVA ANSI/HPVA HP-1-2009 American National Standard for Hardwood and Decorative Plywood 9.27.8.1.(1) 9.30.2.2.(1) 6.2.1.1.(1) 9.32.2.3.(4) HRAI 2017 Edition HRAI Digest 9.32.3.2.(1) 9.33.4.1.(1) Table 11.5.1.1.-A Table 11.5.1.1.-B Rehabilitation Guidelines HUD Guideline on Fire Ratings of Archaic Materials and Assemblies Table 11.5.1.1.-C Table 11.5.1.1.-D/E Table 11.5.1.1.-F 9.32.3.10.(2) HVI HVI 915-2013 Loudness Testing and Rating Procedure Table 9.32.3.10.-B HVI HVI 916-2013 Airflow Test Procedure 9.32.3.10.(1) IAPMO PS 63-2014 Plastic Leaching Chambers 8.7.2.3.(3) Graphical symbols – Safety colours and safety signs – Part 1: Design 3.4.5.1.(2) ISO 3864-1:2011 principles for safety signs and safety markings 9.9.11.3.(2) Graphical symbols - Safety colours and safety signs - Registered safety 3.4.5.1.(2) ISO 7010:2011 signs 9.9.11.3.(2) ISO 8201:2017 Acoustics - audible emergency evacuation signal 3.2.4.18.(2) 5.8.1.4.(2) Acoustics - Laboratory measurement of the flanking transmission of 5.8.1.4.(3) ISO 10848-1:2017 airborne and impact sound between adjoining rooms 5.8.1.5.(2) 5.8.1.5.(3) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 5.8.1.4.(1) 5.8.1.4.(2) 5.8.1.4.(4) Building acoustics - Estimation of acoustic performance of buildings 5.8.1.4.(5) ISO 15712-1:2005 from the performance of elements - Part 1: Airborne sound insulation 5.8.1.4.(6) between rooms 5.8.1.5.(1) 5.8.1.5.(2) 5.8.1.5.(5) 5.8.1.5.(6) Assistive products for blind and vision-impaired persons – Tactile ISO 23599:2019 3.8.3.18.(1) walking surface indicators Supplementary Standard Objectives and Functional Statements Attributed to the Acceptable 1.2.1.1.(1) of Division A r1 MMAH SA-1, September 9, 2024 Solutions 1.2.1.1.(2) of Division A 1.1.2.1.(1) 1.1.2.1.(2) 2.1.2.3.(4) 2.1.2.3.(5) 3.2.6.2.(2) 3.2.8.4.(1) 3.3.1.7.(1) 5.2.1.1.(1) Supplementary Standard 5.2.1.1.(2) MMAH Climatic and Seismic Data SB-1, January 1, 2024 6.2.1.2.(1) 7.4.10.4.(1) 9.4.1.1.(3) 9.4.2.2.(1) Tables 9.6.1.3.-A to 9.6.1.3.-G Table 9.32.3.4. 9.33.3.2.(1) 9.33.4.1.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 2.2.1.10.(2) 3.1.4.8.(4) 3.1.5.5.(4) 3.1.5.6.(2) 3.1.5.29.(1) 3.1.6.9.(6) 3.1.6.10.(2) 3.1.7.1.(2) 3.1.8.16.(2) 3.1.9.5.(1) Supplementary Standard 3.1.12.1.(3) r1 MMAH Fire Performance Ratings SB-2, January 1, 2024 3.2.3.12.(1) 3.2.3.13.(4) 3.6.1.5.(1) 3.13.2.1.(11) 3.13.3.5.(1) 3.13.3.6.(2) 3.13.4.2.(7) 9.10.3.1.(1) 9.10.3.2.(1) 9.10.5.1.(3) 9.10.9.11.(1) 5.8.1.3.(1) 5.8.1.3.(2) 9.10.3.1.(1) Supplementary Standard 9.10.5.1.(3) MMAH Fire and Sound Resistance Tables SB-3, January 1, 2024 9.11.1.3.(1) 9.11.1.3.(2) Table 9.11.1.4. 9.29.5.9.(5) 3.2.6.2.(1) 3.2.6.2.(7) 3.2.6.5.(3) Supplementary Standard 3.2.6.9.(1) MMAH Measures for Fire Safety in High Buildings SB-4, January 1, 2024 3.13.3.6.(5) Table 11.5.1.1.-C Table 11.5.1.1.-D/E Table 11.5.1.1.-F Supplementary Standard MMAH Percolation Times and Soil Descriptions 8.2.1.2.(2) SB-6, January 1, 2024 Supplementary Standard MMAH Guards for Housing and Small Buildings 9.8.8.2.(6) SB-7, January 1, 2024 Supplementary Standard Design, Construction and Installation of Anchorage Systems for Fixed MMAH 3.6.1.6.(1) SB-8, January 1, 2024 Access Ladders Supplementary Standard 9.13.4.1.(3) MMAH Requirements for Soil Gas Control SB-9, January 1, 2024 9.13.4.2.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Table 9.7.3.3. Supplementary Standard 12.2.1.2.(2) MMA SB-10, December 22, Energy Efficiency Requirements 12.2.2.1.(1) 12.2.3.1.(1) Supplementary Standard MMAH Construction of Farm Buildings 2.1.2.3.(5) SB-11, January 1, 2024 Table 9.7.3.3. Supplementary Standard MMA Energy Efficiency for Housing Table 11.5.1.1.-C SB-12, July 7, 2016 12.2.1.2.(3) Supplementary Standard MMAH Glass in Guards 3.1.21.1.(1) SB-13, January 1, 2024 Supplementary Standard MMAH Code of Conduct for Registered Code Agencies 3.7.4.1.(2) of Division C SC-1, January 1, 2024 MOE PIBS 6879 2008 Design Guidelines for Sewage Works 7.1.2.5.(1) MOE PIBS 6881e 2008 Design Guidelines for Drinking-Water Systems 7.1.2.5.(2) NFPA 2023 Publication National Fire Codes 6.2.1.1.(1) 3.1.9.1.(4) 3.2.4.8.(2) 3.2.4.15.(1) 3.2.5.12.(1) 3.2.5.12.(9) 3.2.8.2.(5) 3.2.8.3.(2) 3.3.2.14.(3) NFPA 13-2019 Standard for the Installation of Sprinkler Systems 3.16.1.1.(3) 3.16.1.1.(4) 3.16.1.6.(2) 3.16.1.6.(8) 3.16.1.7.(2) 3.16.2.1.(1) 3.16.2.2.(1) 3.16.3.1.(1) 9.10.9.9.(4) 3.2.4.1.(2) Standard for the Installation of Sprinkler Systems in One- and Two- NFPA 13D-2016 3.2.5.12.(3) Family Dwellings and Manufactured Homes 3.2.7.9.(4) Standard for the Installation of Sprinkler Systems in Low-Rise NFPA 13R-2019 3.2.5.12.(2) Residential Occupancies 3.2.5.9.(1) NFPA 14-2013 Standard for the Installation of Standpipe and Hose Systems 3.2.5.10.(1) 3.2.4.9.(4) NFPA 20-2016 Standard for the Installation of Stationary Pumps for Fire Protection 3.2.5.18.(1) Standard for the Installation of Private Fire Service Mains and Their NFPA 24-2013 7.2.11.1.(1) Appurtenances 3.3.6.3.(1) NFPA 68-2013 Standard on Explosion Protection by Deflagration Venting 3.3.6.4.(2) 3.3.6.4.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 3.2.4.20.(17) 6.9.4.4.(3) NFPA 72-2019 National Fire Alarm and Signaling Code 9.10.19.1.(2) 9.10.19.3.(4) 3.1.8.5.(2) 3.1.8.12.(2) 3.1.8.16.(1) NFPA 80-2013 Standard for Fire Doors and Other Opening Protectives 3.1.9.1.(5) 3.13.3.1.(2) 9.10.9.9.(5) 9.10.13.1.(1) Standard on Incinerators and Waste and Linen Handling Systems and 6.2.2.1.(1) NFPA 82-2014 Equipment 9.10.10.5.(2) Standard for Exhaust Systems for Air Conveying of Vapors, Gases, NFPA 91-2015 6.3.4.3.(1) Mists and Noncombustible Particulate Solids 3.2.4.8.(2) Standard for Ventilation Control and Fire Protection of Commercial NFPA 96-2014 3.6.3.5.(1) Cooking Operations 6.3.1.6.(1) 3.1.8.5.(3) NFPA 105-2013 Standard for Smoke Door Assemblies and other Opening Protectives 3.1.8.5.(7) NFPA 130-2023 Standard for Fixed Guideway Transit and Passenger Rail Systems 3.13.7.1.(1) Standard for Chimneys, Fireplaces, Vents and Solid Fuel-Burning 6.3.3.2.(2) NFPA 211-2019 Appliances 6.3.3.3.(1) 3.14.1.6.(1) Standard Methods of Fire Tests for Flame Propagation of Textiles and NFPA 701-2023 3.14.2.5.(1) Films 3.17.2.5.(1) NFRC 100-2014 Procedure for Determining Fenestration Product U-Factors 12.3.1.2.(1) Procedure for Determining Fenestration Product Solar Heat Gain NFRC 200-2014 12.3.1.2.(1) Coefficient and Visible Transmittance at Normal Incidence 1.4.1.2.(1) of Division A 9.3.2.1.(1) NLGA 2017 Standard Grading Rules for Canadian Lumber Table 9.3.2.1. Tables 9.23.4.2.-A to 9.23.4.3.-J Evaluation of Components and Devices Used in Wastewater Treatment NSF NSF/ANSI 46-2010 8.6.2.1.(2) Systems NSF NSF/ANSI 61-2013 Drinking Water System Components - Health Effects 7.2.10.7C.(1) 9.33.6.5.(2) ANSI/SMACNA 006- SMACNA HVAC Duct Construction Standards - Metal and Flexible 9.33.6.7.(9) 9.33.6.7.(10) ANSI/GRHC/SPRI VR-1- Procedure for Investigating Resistance to Root or Rhizome Penetration SPRI 5.6.1.2.(2) 2018 on Vegetative Roofs Truss Design Procedures and Specifications for Light Metal Plate TPIC 2019 9.23.14.11.(1) Connected Wood Trusses Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference ANSI/CAN/UL/ULC 300- Standard for Fire Testing of Fire Extinguishing Systems for Protection of UL 6.9.1.3.(1) 2019 Commercial Cooking Equipment Standard for Air Leakage Tests of Door Assemblies and Other Opening UL ANSI/UL-1784-2015 3.1.8.4.(4) Protectives UL UL 2034-2008 Single and Multiple Station Carbon Monoxide Alarms 9.33.3.9C.(1) 2.2.1.8.(4) 2.2.1.10.(1) 3.1.5.7.(2) 3.1.5.14.(5) 3.1.5.14.(6) Standard Method of Fire Endurance Tests of Building Construction and ULC CAN/ULC-S101-14 3.1.5.15.(3) Materials 3.1.5.15.(4) 3.1.7.1.(1) 3.1.11.7.(1) 3.2.3.8.(1) 9.10.16.3.(1) 3.1.5.24.(1) 3.1.12.1.(1) Standard Method of Test for Surface Burning Characteristics of Building ULC CAN/ULC-S102-10 Table 5.9.1.1. Materials and Assemblies Table 9.23.17.2.-A 9.29.5.2.(1) 3.1.12.1.(2) Standard Method of Test for Surface Burning Characteristics of 3.1.13.4.(1) ULC CAN/ULC-S102.2-18 Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies 9.27.12.1.(4) 9.27.13.1.(2) ULC CAN/ULC-S102.3-2018 Standard Method of Fire Test of Light Diffusers and Lenses 3.1.13.4.(1) 3.1.4.3.(2) Standard Method of Test for Fire and Smoke Characteristics of ULC CAN/ULC-S102.4-17 3.1.5.21.(2) Electrical Wiring, Cables and Non-Metallic Raceways 3.1.5.23.(2) 3.1.8.4.(1) ULC CAN/ULC-S104-15 Standard Method for Fire Tests of Door Assemblies 3.2.6.5.(3) Standard Specification for Fire Door Frames Meeting the Performance ULC CAN/ULC-S105-16 9.10.13.6.(1) Required by CAN/ULC-S104 Standard Methods for Fire Tests of Window and Glass Block ULC CAN/ULC-S106-15 3.1.8.4.(1) Assemblies ULC CAN/ULC-S107-19 Standard Methods for Fire Tests of Roof Coverings 3.1.15.1.(1) 2.2.1.14.(1) 3.1.16.1.(1) 3.6.5.2.(2) 3.6.5.3.(1) ULC CAN/ULC-S109-14 Standard Method for Flame Tests of Flame-Resistant Fabrics and Films 3.14.1.6.(1) 3.14.2.5.(1) 3.17.2.5.(1) 9.33.6.3.(1) 3.6.5.1.(2) 3.6.5.1.(5) ULC CAN/ULC-S110-13 Standard Methods of Test for Air Ducts 9.33.6.2.(2) 9.33.6.2.(4) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference 6.2.3.13.(1) ULC CAN/ULC-S111-13 Standard Method of Fire Tests for Air Filter Units 9.33.6.14.(1) ULC CAN/ULC-S112-10 Standard Method of Fire Test of Fire-Damper Assemblies 3.1.8.4.(1) Standard for Leakage Rated Dampers for Use in Smoke Control 3.1.8.4.(3) ULC CAN/ULC-S112.1-10 Systems 6.3.2.7.(3) 3.1.9.4.(2) ULC CAN/ULC-S112.2-07 Standard Method of Fire Test of Ceiling Firestop Flap Assemblies 3.6.4.3.(2) 9.10.13.14.(1) Standard Specification for Wood Core Doors Meeting the Performance ULC CAN/ULC-S113:2016 Required by CAN/ULC-S104 for Twenty Minute Fire Rated Closure 9.10.13.2.(1) Assemblies Standard Method of Test for Determination of Non-Combustibility in ULC CAN/ULC-S114:2018 1.4.1.2.(1) of Division A Building Materials 3.1.5.19.(3) 3.1.8.3.(3) 3.1.9.1.(1) 3.1.9.1.(2) 3.1.9.1.(3) 3.1.9.1.(6) 3.1.9.1.(7) 3.1.9.3.(1) ULC CAN/ULC-S115-11 Standard Method of Fire Tests of Firestop Systems 3.1.9.3.(2) 3.1.9.3.(4) 3.1.9.4.(4) 3.1.9.4.(7) 9.10.9.2.(3) 9.10.9.6.(1) 9.10.9.6.(2) 9.10.9.8.(1) 9.10.9.8.(6) Standard Method of Test for the Evaluation of Protective Coverings for ULC CAN/ULC-S124-06 3.1.5.15.(2) Foamed Plastic 3.1.14.1.(1) ULC CAN/ULC-S126-14 Standard Method of Test for Fire Spread Under Roof-Deck Assemblies 3.1.14.2.(1) 3.1.5.5.(1) ULC CAN/ULC-S134-13 Standard Method of Fire Test of Exterior Wall Assemblies 9.10.15.5.(2) Standard Test Method for the Determination of Combustibility ULC ULC-S135-04 Parameters of Building Materials Using an Oxygen Consumption 3.1.5.1.(2) Calorimeter (Cone Calorimeter) ULC CAN/ULC-S136:2021 Standard Method for Fire Test of Sprinkler Protected Window Systems 3.1.8.20.(1) Standard Method of Test for Fire Growth of Insulated Building Panels in 3.1.5.7.(1) ULC CAN/ULC-S138-06 a Full-Scale Room Configuration 3.1.5.7.(3) 3.2.6.5.(6) Standard for Fire Test for Evaluation of Integrity of Electrical Power, ULC CAN/ULC-S139:17 3.2.7.10.(2) Data and Optical Fibre Cables 3.2.7.10.(3) Standard Method of Fire Tests for Non-Metallic Electrical and Optical ULC CAN/ULC-S143-14 3.1.5.23.(1) Fibre Cable Raceway Systems Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference ULC CAN/ULC-S144-12 Standard Method of Fire Resistance Test - Grease Duct Assemblies 3.6.3.5.(2) Standard Method of Test for the Evaluation of Encapsulation Materials ULC CAN/ULC-S146-19 and Assemblies of Materials for the Protection of Structural Timber 3.1.6.5.(1) Elements ULC S505-1974 Standard for Fusible Links for Fire Protection Service 3.1.8.10.(2) 3.1.8.11.(3) 3.1.8.14.(3) 3.2.4.5.(1) ULC CAN/ULC-S524:2019 Standard for Installation of Fire Alarm Systems 3.2.4.20.(10) 3.2.4.20.(15) 9.10.19.4.(3) 9.10.19.6.(2) 3.2.4.20.(2) ULC CAN/ULC-S531:2019 Standard for Smoke Alarms 9.10.19.1.(1) 3.2.4.5.(2) ULC CAN/ULC-S537:2019 Standard for Verification of Fire Alarm Systems 3.2.4.20.(10) Standard for Residential Fire and Life Safety Warning Systems: 3.2.4.21.(1) ULC CAN/ULC-S540-13 Installation, Inspection, Testing and Maintenance 9.10.19.8.(1) 3.2.4.20.(13) ULC CAN/ULC-S553-14 Standard for the Installation of Smoke Alarms 9.10.19.3.(2) Standard for Installation and Services for Fire Signal Receiving Centres 3.2.4.7.(4) ULC CAN/ULC-S561-13 and Systems 3.13.5.4.(1) Standard for Photoluminescent and Self-Luminous Exit Signs and Path 3.4.5.1.(4.1) ULC CAN/ULC-S572:2017 Marking Systems 9.9.11.3.(3) ULC CAN/ULC-S610:2018 Standard for Factory-Built Fireplace Systems 9.22.8.1.(1) ULC ULC-S628-93 Standard for Fireplace Inserts 9.22.10.1.(1) ULC CAN/ULC-S629:2016 Standard for 650ºC Factory-Built Chimneys 9.21.1.3.(1) Standard for Steel Liner Assemblies for Solid Fuel-Burning Masonry ULC CAN/ULC-S639-M87 9.22.2.3.(1) Fireplaces Table 5.9.1.1. Table 9.23.17.1.-A ULC CAN/ULC-S701.1:2017 Standard for Thermal Insulation, Polystyrene Boards 9.25.2.2.(1) 9.25.2.2.(4) 3.1.6.3.(4) Table 5.9.1.1. Standard for Mineral Fibre Thermal Insulation for Buildings, Part 1: ULC CAN/ULC-S702.1-14 9.10.9.8.(3) Material Specification Table 9.23.17.2.-A 9.25.2.2.(1) Table 5.9.1.1. ULC CAN/ULC-S703-09 Standard for Cellulose Fibre Insulation (CFI) for Buildings 9.25.2.2.(1) Table 5.9.1.1. Standard for Thermal Insulation, Polyurethane and Polyisocyanurate ULC CAN/ULC-S704.1:2017 Table 9.23.17.2.A Boards, Faced 9.25.2.2.(1) Standard for Thermal Insulation – Spray Applied Rigid Polyurethane Table 5.9.1.1. ULC CAN/ULC-S705.1:2018 Foam, Medium Density - Material – Specification 9.25.2.2.(1) Table 1.3.1.2. (Cont’d) Documents Referenced in the Building Code Forming Part of Sentence 1.3.1.2.(1) Issuing Agency Document Number Title of Document Code Reference Standard for Thermal Insulation – Spray Applied Rigid Polyurethane Table 5.9.1.1. ULC CAN/ULC-S705.2-05 Foam, Medium Density – Application 9.25.2.5.(1) Table 5.9.1.1. 9.23.16.7.(3) ULC CAN/ULC-S706.1:2016 Standard for Wood Fibre Insulating Boards for Buildings Table 9.23.17.2.-A 9.25.2.2.(1) 9.29.8.1.(1) Standard for Bead-Applied One Component Polyurethane Air Sealant ULC CAN/ULC-S710.1:2019 Table 5.9.1.1. Foam, Part 1: Material Specification Standard for Bead-Applied Two Component Polyurethane Air Sealant ULC CAN/ULC-S711.1:2019 Table 5.9.1.1. Foam, Part 1: Material Specification 5.9.4.1.(1) Standard for Exterior Insulation and Finish Systems (EIFS) – Materials ULC CAN/ULC-S716.1-12 9.27.14.1.(1) and Systems 9.27.14.2.(1) Standard for Exterior Insulation and Finish Systems (EIFS) – Installation ULC CAN/ULC-S716.2-12 9.27.14.3.(2) of EIFS Components and Water Resistive Barrier Standard for Exterior Insulation and Finish Systems (EIFS) – Design ULC CAN/ULC-S716.3-12 9.27.14.3.(1) Application Standard for Flat Wall Insulating Concrete Form (ICF) Units – Material Table 5.9.1.1. ULC CAN/ULC-S717.1:2017 Properties 9.15.4.1.(1) ULC CAN/ULC-S741-08 Standard for Air Barrier Materials – Specification 5.4.1.2.(2) 5.4.1.2.(1) ULC CAN/ULC-S742-11 Standard for Air Barrier Assemblies – Specification 5.4.1.2.(2) Standard for Integrated Systems Testing of Fire Protection and Life 3.2.9.1.(1) ULC CAN/ULC-S1001-11 Safety Systems 9.10.1.2.(1) 3.2.5.13.(2) ULC ULC/ORD-C199P-02 Combustible Piping for Sprinkler Systems 3.2.5.13.(5) Fire Testing of Restaurant Cooking Area Fire Extinguishing System ULC ULC/ORD-C1254.6-95 6.9.1.3.(1) Units USDA October 1993 Soil Survey Manual 8.2.1.2.(2) Port Lands Flood Protection and Enabling Infrastructure Due Diligence WT October 20, 2016 1.3.3.6.(4) of Division C Report

(1) The abbreviations of proper names in this Code shall have the meanings assigned to them in Table 1.3.2.1. Table 1.3.2.1. Abbreviations of Proper Names Forming Part of Sentence 1.3.2.1.(1) Abbreviation Meaning ACGIH American Conference of Governmental Industrial Hygienists ACI American Concrete Institute AHRI Air-Conditioning, Heating and Refrigeration Institute AISI American Iron and Steel Institute ANSI American National Standards Institute APA The Engineered Wood Association APHA American Public Health Association ASCE American Society of Civil Engineers ASHRAE American Society of Heating, Refrigerating and Air-Conditioning Engineers ASME The American Society of Mechanical Engineers ASPE American Society of Plumbing Engineers ASSE American Society of Sanitary Engineering ASTM American Society for Testing and Materials AWS American Welding Society AWWA American Water Works Association BCMOH British Columbia Ministry of Health BNQ Bureau de Normalisation du Québec National Standard of Canada designation The number or name following the CAN designation represents the agency under whose auspices the standard is issued. CAN1 designates CGA, CAN CAN2 designates CGSB, CAN3 designates CSA, and CAN4 designates ULC. CCBFC Canadian Commission on Building and Fire Codes CGSB Canadian General Standards Board CHC Canadian Hydronics Council CSA CSA Group, formerly called Canadian Standards Association CWC Canadian Wood Council DBR Division of Building Research, known as the Institute for Research in Construction since 1985 DOE U.S. Department of Energy EPA Environmental Protection Agency FINA Fédération Internationale de Natation GRHC Green Roofs for Healthy Cities HC Health Canada HI Hydronics Institute HPVA Hardwood Plywood & Veneer Association Table 1.3.2.1. (Cont’d) Abbreviations of Proper Names Forming Part of Sentence 1.3.2.1.(1) Abbreviation Meaning HRAI Heating, Refrigerating and Air-Conditioning Institute of Canada HUD U.S. Department of Housing and Urban Development HVI Home Ventilating Institute IAPMO International Association of Plumbing and Mechanical Officials ICC International Code Council ISO International Organization for Standardization MMA Ontario Ministry of Municipal Affairs MMAH Ontario Ministry of Municipal Affairs and Housing MOE Ontario Ministry of the Environment NFPA National Fire Protection Association NLGA National Lumber Grades Authority NRCan Natural Resources Canada NSF National Sanitation Foundation International, formerly called National Sanitation Federation SEI Structural Engineering Institute SMACNA Sheet Metal and Air Conditioning Contractors National Association Inc. SPRI Single Ply Roofing Industry TC Transport Canada TPIC Truss Plate Institute of Canada UL Underwriters Laboratories Inc. ULC Underwriters’ Laboratories of Canada USDA United States Department of Agriculture WEF World Environment Federation WT Waterfront Toronto