DIVISION C · PART 2 — ALTERNATIVE SOLUTIONSUpdated for the 2024 Ontario Building Code
Try BUILDAiD Beta
2.1.1.2.Tests
(1) Where no published test method to establish the suitability of an alternative solution proposed under Article 2.1.1.1.
exists, then the tests used for the purposes of that Article shall be designed to simulate or exceed anticipated service
conditions or shall be designed to compare the performance of the material or system with a similar material or system
that is known to be acceptable.
(2) The results of tests or evaluations based on test standards, other than as described in this Code, may be used for the
purposes of Sentence (1), if the alternate test standards provide comparable results.
Understand this provision in seconds
BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.
Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.