Code Library › Volume 1 › Section 9.28 — Stucco
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.28.4.4.Self-Furring Devices

(1) Stucco lath shall be held not less than 6 mm away from the backing by means of suitable self-furring devices.
← Previous9.28.4.3. Stucco Lath SpecificationsNext →9.28.4.5. Application of Stucco Lath

Common questions about this part of the code

What are the lath and mix requirements for exterior stucco in Ontario?How much clearance does stucco need above the ground in Ontario?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.