Code Library › Volume 1 › Section 9.27 — Cladding
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.27.7.3.Fasteners

(1) Shingles or shakes shall be fastened with nails located approximately 20 mm from each edge and not less than 25 mm above the exposure line for single-course applications, or approximately 50 mm above the butt for double-course applications.
← Previous9.27.7.2. WidthNext →9.27.7.4. Offsetting of Joints

Common questions about this part of the code

Do I need a rainscreen or air gap behind siding in Ontario?How far above the ground does siding have to be in Ontario?What are the code rules for installing vinyl siding in Ontario?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.