Code Library › Volume 1 › Section 9.27 — Cladding
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.27.10.3.Panel Cladding

(1) OSB and waferboard applied in panels shall have all edges supported and treated with a primer or sealer. (2) Not less than a 3 mm gap shall be provided between sheets in cladding described in Sentence (1). (3) Vertical joints in cladding described in Sentence (1) shall be protected with batten strips or sealant when the OSB and waferboard joints are not matched. (4) Horizontal joints in cladding described in Sentence (1) shall be lapped not less than 25 mm or shall be suitably flashed.
← Previous9.27.10.2. ThicknessNext →9.27.10.4. Clearance

Common questions about this part of the code

Do I need a rainscreen or air gap behind siding in Ontario?How far above the ground does siding have to be in Ontario?What are the code rules for installing vinyl siding in Ontario?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.