Code Library › Volume 1 › Section 9.24 — Sheet Steel Stud Wall Framing
PART 9 — HOUSING AND SMALL BUILDINGSUpdated for the 2024 Ontario Building Code

9.24.2.2.Thickness of Studs

(1) Except as required in Article 9.24.2.4., steel studs in non-loadbearing interior walls shall have a metal thickness of not less than 0.46 mm.
← Previous9.24.2.1. Size and Spacing of Studs in Interior WallsNext →9.24.2.3. Runners

Common questions about this part of the code

When are steel studs allowed in a house under the Ontario Building Code?Can steel studs be used for load-bearing walls in Ontario houses?

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.