7.2.11.2.Certification or Conformance

(1) Water service pipes and fire service mains shall conform to the standards for the materials listed in Table 7.2.11.2. Table 7.2.11.2. Water Service Pipe and Fire Service Main Materials Forming Part of Sentence 7.2.11.2.(1) Material Standard Limitations Conform to Series 160 or a higher series of CSA Polyethylene pipe and B137.1, “Polyethylene (PE) Pipe, tubing and fittings for fittings cold water pressure services” Crosslinked polyethylene Conform to CSA B137.5, “Crosslinked polyethylene pressure pipe or tube and (PEX) tubing systems for pressure applications” fittings Conform to CSA B137.3, “Rigid polyvinylchloride (PVC) pipe and fittings for pressure applications”, or certified to Pipe and fittings must have a rated working PVC pipe and fittings CSA B137.2, “Polyvinylchloride (PVC) injection-moulded pressure of 1 100 kPa or more gasketed fittings for pressure applications” The design temperature and pressure shall Conform to CSA B137.6, “Chlorinated polyvinylchloride conform to the requirements of the CSA B137.6, CPVC pipe and fittings (CPVC) pipe, tubing and fittings for hot and cold water “Chlorinated polyvinylchloride (CPVC) pipe, distribution systems” tubing and fittings for hot and cold water distribution systems” Pipe shall have a cement-mortar lining Conform to ANSI/AWWA C151 / A21.51, “Ductile-Iron conforming to ANSI/AWWA C104 / A21.4, Cast-iron water pipe Pipe, Centrifugally Cast” “Cement-Mortar Lining for Ductile-Iron Pipe and Fittings” Pipe shall have a cement-mortar lining Iron fittings for cast-iron or Conform to ANSI/AWWA C110 / A21.10, “Ductile-Iron conforming to ANSI/AWWA C104 / A21.4, ductile-iron water pipes and Gray-Iron Fittings” “Cement-Mortar Lining for Ductile-Iron Pipe and Fittings” Rubber gasket joints for Conform to ANSI/AWWA C111 / A21.11, “Rubber cast-iron and ductile-iron Gasket Joints for Ductile-Iron Pressure Pipe and water pipes Fittings” Screwed cast-iron water Conform to ASME B16.4, “Gray Iron Threaded Fittings: Screwed cast-iron water fittings shall be fittings Classes 125 and 250” cement-mortar lined or galvanized Certified to ASTM B88, “Standard Specification for Type K soft copper tube Seamless Copper Water Tube” Conform to ASME B16.18, “Cast Copper Alloy Solder Solder-joint fittings not made by casting or the Solder-joint fittings for Joint Pressure Fittings”, or conform to ASME B16.22, wrought process shall conform to the applicable copper water systems “Wrought Copper and Copper Alloy Solder-Joint requirements of ASME B16.18, “Cast Copper Pressure Fittings” Alloy Solder-Joint Pressure Fittings” Flared-joint fittings not made by casting shall Flared-joint fittings for Conform to ASME B16.26, “Cast Copper Alloy Fittings conform to ASME B16.26, “Cast Copper Alloy copper water systems for Flared Copper Tubes” Fittings for Flared Copper Tubes” Conform to CSA B137.9, “Polyethylene/aluminum/ PE/AL/PE pipe and fittings polyethylene (PE-AL-PE) composite pressure-pipe systems” Conform to CSA B137.10, “Crosslinked polyethylene/ PEX/AL/PEX pipe and aluminum/crosslinked polyethylene (PEX-AL-PEX) fittings composite pressure-pipe systems”