4.3.5.1.Design Basis for Aluminum

(1) Buildings and their structural members made of aluminum shall conform to CSA S157/S157.1, “Strength design in
     aluminum/Commentary on CSA S157-17, Strength design in aluminum,” using the loads stipulated in Section 4.1., in
     accordance with limit states design in Subsection 4.1.3.

← Previous4.3.4.3. Steel Building Systems Next →4.3.6.1. Design Basis for Glass

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.