2.2.6.8.Ramps and Stairways

(1) Except as permitted by Sentence (3), ramps and stairways that do not serve as exits shall
     (a) be not less than 750 mm wide, and
     (b) conform to Articles 3.3.1.16., 3.4.3.4., 3.4.6.1. to 3.4.6.3., 3.4.6.8. and 3.4.6.9.

     (2) Except as permitted by Sentence (3), the maximum slope of a ramp shall be 1 in 6.

     (3) Ramps and stairways need not comply with Sentences (1) and (2), provided
     (a) they are intended only
           (i) for occasional use for servicing equipment and machinery, or
          (ii) for use as animal handling ramps, and
     (b) they do not serve as exits.

← Previous2.2.6.7. Doors and Door Hardware Next →2.2.6.9. Floor Openings

Understand this provision in seconds

BUILDAiD Assist explains any article of the building code in plain English — with exact citations, exceptions and related requirements.

Try BUILDAiD Beta

Code text is reproduced for reference from the Ontario Building Code (O. Reg. 163/24, 2024 Building Code Compendium). This page is provided for general information and is not an official copy. Always verify requirements against the official Ontario Building Code and confirm with your local building department.